Fiberglass Question for Jerry

[tuner]

If you zoom in on the second and third images, the "internal gelcoat" is obvious. The keel looks so much better now! I will post some pictures...

[tuner]

I used 3m high strength filler. The filler faired out nicely and I brushed on some gelcoat.

I think there may have been some mold issues...

[tuner]

Thanks Jerry!

[tuner]

Great! You are welcome.

[tuner]

My forward keel suffered some damage prior to my ownership. It was caused by a bad roller on the trailer. I have polyester resin, biaxial cloth, west...

[tuner]

You will need to identify your ECU type. I think it should be MEFI 4.

Bob Radkey is a friend of mine, I use his software and hardware to...

[tuner]

Wow, I'm going to give that a try tomorrow. Nice work Chris!

[tuner]

Jerry, have you checked the draw yet? I agree with starting at the battery and battery switch so you can identify the leg or "branch" to dig...

[tuner]

Use a voltmeter, DVM, etc. with a 10 amp gauge setting. Measure between the battery post and the battery cable, It doesn't matter which side of the battery,...

[tuner]

That looks yummy! Put a big glass of milk next to it

[tuner]

It was on my original rigid exhaust hose, no difference in sound with new hose/no insulation. I think most of the sound comes from the transom and the...

[tuner]

The engine was installed in 1999 so I thinks it's time was up. I removed the pump and it ran on my bench, probably some debris locked the gears. I could...

[tuner]

Following the cooling system upgrade, I experienced two corrosion related failures.




The first was a brass crimp on one...