pulling the engine in a 20' open

[Mauro]

Thanks

I'll add replacing the lines to the list.

I think I saw you tube video installing the unit and lines and they appeared...

[Mauro]

One thing that I still think is odd, is that of the 2 hydraulic lines coming from the pump, one is capped and the other goes to the transom and is teed....

[Mauro]

well, apparently what I thought was a the cover is the resevoir and it's oriented on the bottom as it should be . my pump section is missing a cover.......

[Mauro]

Quick, Excuse my ignorance but I need some clarification.

Are you saying everything mounted to block from the transmission / shaft flange,...

[Mauro]

looks great...

[Mauro]

hey all,

Questions - My engine bed needs replacing, on 1988 20 open , was in the boat measuring engine mounts and depth of the oil pan so...

[Mauro]

Well just checked my engine hold down bolts and 3 out of 4 on the port side just pulled out with no resistance. Gonna have to bite the bullet, but it...

[Mauro]

Hey Mako

Just checked the dimension on my windsheild and mine is a few inches narrower and not as deep. Thanks for checking

[Mauro]

Hi Issa,

I am curious about the new switches you replaced the old ones with.

What switches did you replace the old ones with...

[Mauro]

Hi Mako,

What is the size (width x depth) of the windsheild? I have a 88 open 20 and my winshield is covered with tons of micro cracks...

[Mauro]

hey flatrockI feel for yah

Where was the water seeping out of? Is there a limber hole into the engine bed ? Sounds like it was coming...

[Mauro]

nice little skiff Is it completely flat bottom?, Too bad I don't live in Long Island (well actually I.m glad I don't live there anymore lol)

[Mauro]

added a better pic,

I am thinking a small vertical lip on the i side of the cut out.

May try it as I will be filling lots...

[Mauro]

Finally got my engine running, been 2 years I guess. And I decided to take a look at the starboard fuel tank after getting the fuel backing up (some...