User Profile

[Deputyrpa]

Like Redneck asked, check your wire for proper condition and size. Temp gauges read voltage through resistance in the sending unit. The sending unit is...

[Deputyrpa]

Thank you Jerry. I do not know if he found the mold yet. I am ordering a transom baitwell as well. I kinda wish I had the tackle station model, but my...

[Deputyrpa]

Yikes! I could hire Jerry to come up here and build me one for that price! Including the flight, hotel and meals.

Thanks for the heads up...

[Deputyrpa]

Congratulations! That must have been one heck of a rush on the fly rod! Gorgeous backdrop too!

That should keep you down there for a while...

[Deputyrpa]

Handy pic, Ship....

[Deputyrpa]

The 4 engine/transmission mounts allow for each corner of the engine /transmission to move up/down and left/right. The only reason I can see for removing...

[Deputyrpa]

Absolutely! We've gotten 5 zucchini from one plant already. Nutrient fortified with Azomite.

Now comes scaping all the foam off. I swear...

[Deputyrpa]

Thanks everyone! I just used some 2x6s, a small rigging chain and the old 12-ton bottle jack. It came up easily and smoothly with that leverage. The bottom...

[Deputyrpa]

I do have a wire saw, and a sheetrock saw. I did the wood, steel pipe and ratchet strap program this morning to no avail. I'm going to try and get to...

[Deputyrpa]

Hello again! Good to have you aboard!

[Deputyrpa]

I got it off. I winced a bit while forcing it from the tight fit, but no mishaps.

Now to get the tank out. I sawzall'd the foam on the sides....

[Deputyrpa]

Ha ha! Cool beans. Thanks!

[Deputyrpa]

Thanks to you, I looked closely! I removed everything including the scoop thru-hull. The little fella fell right out onto the floor! I ordered new everything...

[Deputyrpa]

It appears to have a lip, and the fit under the port side is tight with the angle aluminum, but I'll unscrew that. Thanks!...

[Deputyrpa]

Here. I removed the door trim, threshold and base trim. ...

[Deputyrpa]

Yes. I see that there is aluminum angle iron screwed in....

[Deputyrpa]

In my continued effort to go through the entire boat before splashing it, I set out to remove and clean the Groco filter basket in the 26HT, and it is...

[Deputyrpa]

Does anyone have any tips on how to get the floorboard off from the fresh water tank compartment without dismantling the entire boat?

[Deputyrpa]

Update!

I figured I'd clean the 40 gallon fresh water tank with bleach and water. Well ,,,,, it leaks. Water began streaming out of the bottom....

[Deputyrpa]

I noticed that the PO had installed a little Jabsco auto pressure water pump (1.1GPM) and filter just for the head's faucet. However, it is seized up....