Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Anyone who has been to an Emerald Isle get together knows Jay. He has a house in Beaufort and has goats. Nicest lawn on the road....
-
Moving weight
Just a little heads up here. I moved a lot of things around in my 20 when I installed the Mercruiser 170. A lot of rain last night and the boat was full,...
-
Gary, please post up pictures of that 17. I think it is one I redid. If it is, it has a good story.
Leave a comment:
-
Doing my part. Just sent my annual donation to Gore for my carbon credits....
Leave a comment:
-
Just got back from Blacksburg, Va. 6.5 hrs each way and a lot of driving while there. $4.20 was average everywhere for gas.
Leave a comment:
-
Lawn mowers
Suggestions please. I have a very small lawn. Thinking of battery powered....
-
-
I cut them out with a cut off wheel. Pipe cap should pull off. I have never seen them glued on.
Leave a comment:
-
-
-
-
-
No gas from the pump. Mechanical pump. Did I put it on wrong? Did it dry out sitting for years? Anything to do before taking it off? When I remove the...
Leave a comment:
-
I'd go with the 1/32 for that repair. No wax needed in the gelcoat. It will sand without wax. This step is just to fill.
Leave a comment:
-
Mounted breaker. good to go. engine turns over easily. will start tomorrow. ...
Leave a comment:
-
Will do Steve. She is ready to be fired up. Long time coming. Hope it preforms as good as it looks.
Leave a comment:
-
-
Thank you, Steve and Chris. So just connect the alternator to the battery with a breaker and I'm good. Thought so but electrical terrifies me. Somehow,...
Leave a comment:
-
Have 12v at starter but not at alternator. Yes testing to block. I don't see a fuse between starter and alternator but on my other boat there is one....
Leave a comment:
-
If it were my boat, I would grind it to get rid of all the bits and pieces sticking up first. Then I would mix some gelcoat with milled fibers and spread...
Leave a comment:
No activity results to display
Show More
Leave a comment: