Consider this your neighborhood bar,corner soap box, fish house, marina, coffee shop or anywhere else you go to hang out with friends and talk anything you want. Only thing, personal attacks will not be tolerated. No name calling or belittling. Be civil at all times and have fun. If a topic offends you, don't read any further.
See more
See less

Electrical Question

  • Filter
  • Time
  • Show
Clear All
new posts

  • Electrical Question

    My fish finder wasn't working so I traced the power line back to a fuse box and the fuse was good however the one next to it was burnt.

    With a test light I tested to see if there was power feeding the fuse box, all good there, so I tested the hot side of the fuse box and I'm not getting power down the bus bar that feeds the fuse box. I took a feed from the hot side of the feed protected via a inline fuse to the feed on the fish finder and powered up.

    The male plug seconded from the left is where it was plugged into.

    Any thoughts???
    Last edited by Striper Sniper; 11-07-2018, 09:02 AM.

  • #2
    Cracked or corroded off under the housing somewhere...
    Are all of the fuse ports dead?
    1986 26' HT w/5.7 PCM 330HP RWC


    • Striper Sniper
      Striper Sniper commented
      Editing a comment
      I'll check that and let you know, I believe they are, there's no power at he opposite end of the bus bar.